Cornell | ONLINE MACHINERY LISTING – Used/Demonstrator Versators and Other Equipment

ONLINE MACHINERY LISTING – Used/Demonstrator Versators and Other Equipment

The Cornell Machine Company is pleased to offer the following used/demonstrator Versators and other equipment. Please also contact Cornell Machine as additional units may be available but not yet listed.

	LISTING ID# CMU-10001 STATUS: Used/demonstration unit – IN STOCK DESCRIPTION: One (1) D-8 Versator in Standard Stainless Steel construction equipped with mechanical variable speed drive.

	LISTING ID# CMU-10002 STATUS: Used/demonstration unit – IN STOCK DESCRIPTION: One (1) D-8 Versator in Polished/Sanitary Stainless Steel construction equipped with mechanical variable speed drive. Electrical motor starter (for 208 Volt operation) can also be supplied.

	LISTING ID# CMU-10003 STATUS: Used/demonstration unit – IN STOCK DESCRIPTION: One (1) D-16EH Versator in Standard Semi-Stainless Steel construction (wetted parts – 316SS) equipped with drive motor (inverter duty) and motor stand.

	LISTING ID# CMU-10004 STATUS: Used/demonstration unit – IN STOCK DESCRIPTION: One (1) D-16EH Versator in Standard Stainless Steel construction equipped with mechanical variable speed drive.

	LISTING ID# CMU-10005 STATUS: Used/demonstration unit – IN STOCK DESCRIPTION: One (1) D-16EH Versator in Polished/Sanitary Stainless Steel construction equipped with mechanical variable speed drive.

	LISTING ID# CMU-10010 STATUS: Used/demonstration unit – IN STOCK DESCRIPTION: One (1) D-8 Versator in Standard Stainless Steel construction equipped with mechanical variable speed drive, oil-sealed vacuum pump, vacuum piping, electrical control panel, and Two Tier Table with casters.

	LISTING ID# CMU-10011 STATUS: Used/demonstration unit – IN STOCK DESCRIPTION: One (1) D-26LH Versator in Standard Semi-Stainless Steel construction (wetted parts - 316SS) equipped with drive motor, belts/sheaves/guard – all mounted on base-plate.

	LISTING ID# CMU-10007 STATUS: Used/demonstration unit – IN STOCK DESCRIPTION: One (1) D-26LH Versator in Polished/Sanitary Stainless Steel construction equipped with drive motor, belts/sheaves/guard – all mounted on Stainless Steel tubing frame.

	LISTING ID# CMU-10008 STATUS: Used/demonstration unit – IN STOCK DESCRIPTION: One (1) LYCO/Wausau 102BLMS-120-3 Liquid Ring (water-sealed) Single Stage Vacuum Pump in Stainless Steel construction equipped with 7.5HP drive motor, Stainless Steel frame, Stainless Steel separator/muffler, adjustable service liquid inlet line. Vacuum pump rated by the manufacturer for approximately 10 CFM at 28" Hg of vacuum.

	LISTING ID# CMU-10009 STATUS: Used/demonstration units – IN STOCK DESCRIPTION: Sterling/SIHI LPH-45312 Liquid Ring (water-sealed) Two Stage Vacuum Pumps in Cast Iron/Bronze Fitted construction equipped with 7.5HP drive motor, base, discharge separator, adjustable service liquid inlet line.

Used Versators supplied by Cornell Machine have been maintained, refurbished, and tested with the unit's original engineering files and records by serial number.

Used Versators supplied by Cornell Machine undergo the same assembly, testing, and fabrication procedures as a new Versator.

Used Versators supplied by Cornell Machine are maintained and refurbished with original Cornell Machine parts and supplied in like-new condition.

Used Versators supplied by Cornell Machine include a GUARANTEE.

Used Versators supplied by Cornell Machine include an up-to-date operation manual, drawings, and technical information.

NO USED MACHINERY DEALERS ARE AFFILIATED WITH THE CORNELL MACHINE COMPANY.

TERMS: Equipment status and availability is subject to prior sale or rental and is not guaranteed by display on this page. All units supplied EXW Springfield, NJ, USA unless otherwise specified. Typographical errors are subject to correction. The Cornell Machine Company reserves the right to update the content of this page without notice. Information deemed reliable but not guaranteed. Equipment with status other than new has been used by persons other than seller. The original manufacturer is the sole warrantor of any equipment, components, or parts sold, but not manufactured, by The Cornell Machine Company.

Do you have a used Versator to sell? Please e-mail Cornell Machine.

!!!WARNING!!! The Cornell Machine Company recommends that any used Versator NOT purchased from Cornell Machine be returned to our facility for a complete safety inspection PRIOR to being put into service. Please contact Cornell Machine for more details and DO NOT ship units for inspection without prior arrangement.